What are the common problems with Capsule Shell Making Machines and how to solve them?

Oct 27, 2025

Leave a message

Hey there! As a supplier of Capsule Shell Making Machines, I've seen my fair share of issues that customers run into. In this blog, I'll walk you through some common problems with these machines and how to solve them.

1. Uneven Capsule Wall Thickness

One of the most common problems is uneven capsule wall thickness. This can lead to capsules that don't look right or don't function properly. There are a few reasons why this might happen.

Causes

  • Temperature Fluctuations: The temperature of the gelatin solution is crucial. If it's too high or too low, the gelatin might not coat the pins evenly. For example, if the temperature is too high, the gelatin will be too thin and might not form a proper layer on the pins.
  • Pin Condition: Worn - out or dirty pins can also cause uneven coating. Pins that are not clean or have rough surfaces won't allow the gelatin to spread evenly.

Solutions

  • Temperature Control: Make sure to monitor and control the temperature of the gelatin solution closely. Most machines have temperature control settings, so set them according to the manufacturer's recommendations. Regularly check the temperature with a reliable thermometer.
  • Pin Maintenance: Clean the pins regularly. You can use a soft brush and a mild cleaning solution to remove any gelatin residue. Inspect the pins for wear and tear and replace them if necessary.

2. Capsule Sticking to the Machine

Another annoying problem is when capsules stick to the machine. This can slow down the production process and even damage the capsules.

Causes

  • Gelatin Formula: The wrong gelatin formula can make the capsules sticky. If the gelatin has too much moisture or the wrong additives, it might adhere to the machine parts.
  • Machine Surface: A dirty or rough machine surface can also cause sticking. Grease, dust, or other contaminants on the surface can make it easier for the capsules to stick.

Solutions

  • Adjust the Gelatin Formula: Work with a gelatin supplier to optimize the formula. They can help you adjust the moisture content and additives to reduce stickiness.
  • Machine Cleaning: Keep the machine clean. Regularly wipe down the surfaces with a clean cloth and a suitable cleaning agent. Make sure to clean hard - to - reach areas as well.

3. Low Production Efficiency

If your Capsule Shell Making Machine is not producing capsules at the expected rate, it can be a big headache.

Causes

  • Machine Settings: Incorrect machine settings, such as the speed of the conveyor belt or the frequency of the pin dipping, can reduce production efficiency.
  • Operator Training: Untrained operators might not be using the machine to its full potential. They might not know how to adjust the settings properly or how to troubleshoot minor issues quickly.

Solutions

  • Optimize Machine Settings: Refer to the machine's user manual to set the correct parameters. You can also experiment with different settings to find the optimal production speed without sacrificing quality.
  • Operator Training: Provide comprehensive training to your operators. Make sure they understand how the machine works, how to adjust the settings, and how to handle common problems.

4. Capsule Deformation

Capsule deformation is another issue that can affect the quality of the final product.

Causes

  • Drying Conditions: Improper drying conditions can cause capsules to deform. If the drying temperature is too high or the drying time is too long, the capsules might shrink or warp.
  • Handling: Rough handling of the capsules during the production process can also lead to deformation. For example, if the capsules are pushed too hard during ejection from the machine, they might get misshapen.

Solutions

  • Drying Optimization: Adjust the drying conditions according to the type of capsules you're making. Use a drying chamber with proper temperature and humidity control. Monitor the drying process closely and make adjustments as needed.
  • Gentle Handling: Train your operators to handle the capsules gently. Use appropriate ejection mechanisms to avoid applying too much force on the capsules.

5. Gelatin Bubbles in the Capsules

Gelatin bubbles in the capsules can be a cosmetic and functional problem.

Causes

  • Gelatin Mixing: Improper mixing of the gelatin solution can introduce air bubbles. If the mixing speed is too high or the mixing time is too short, bubbles might form.
  • Filling Process: During the filling process, air can also get trapped in the gelatin, creating bubbles.

Solutions

  • Proper Gelatin Mixing: Follow the recommended mixing procedure. Use a slow - speed mixer to avoid introducing too much air. Let the gelatin solution sit for a while after mixing to allow the bubbles to rise to the surface and pop.
  • Filling Technique: Optimize the filling process to minimize air entrapment. You can use a vacuum system to remove air from the filling chamber or adjust the filling speed.

6. Inconsistent Capsule Size

Inconsistent capsule size can be a major problem, especially if the capsules are used for pharmaceutical or nutraceutical products.

Gelatin Capsule Making MachineWechatIMG1298

Causes

  • Mold Wear: Over time, the molds in the machine can wear out. This can cause variations in the capsule size.
  • Material Variation: Variations in the gelatin material, such as differences in viscosity or density, can also lead to inconsistent capsule size.

Solutions

  • Mold Replacement: Regularly inspect the molds for wear and tear. Replace the molds when they start to show signs of damage or when the capsule size becomes inconsistent.
  • Material Quality Control: Work with a reliable gelatin supplier. Request regular quality control reports to ensure that the gelatin material meets the required specifications.

7. Machine Breakdowns

Machine breakdowns can halt production and cause significant losses.

Causes

  • Lack of Maintenance: Not performing regular maintenance on the machine can lead to breakdowns. Components can wear out, belts can break, and electrical systems can malfunction.
  • Overuse: Running the machine continuously without proper breaks can also cause it to break down. The machine parts can overheat and get damaged.

Solutions

  • Regular Maintenance: Follow the machine's maintenance schedule. This includes lubricating moving parts, checking electrical connections, and replacing worn - out components. Keep a stock of spare parts so you can quickly replace any faulty parts.
  • Production Scheduling: Plan your production schedule to allow the machine to rest. Don't run it at full capacity for extended periods.

Conclusion

As you can see, there are several common problems with Capsule Shell Making Machines, but most of them can be solved with proper maintenance, optimization, and operator training. If you're facing any of these issues, don't hesitate to reach out to us. We're here to help you keep your production running smoothly.

We offer a wide range of high - quality capsule - making machines, including the Gelatin Capsule Making Machine, Hollow Gelatin Capsule Production Line, and Hard Gelatin Capsule Manufacturing Machine. If you're interested in purchasing a machine or need more information, feel free to contact us for a consultation. We can help you choose the right machine for your production needs and provide you with ongoing support.

References

  • Manufacturer's manuals of Capsule Shell Making Machines
  • Industry research on capsule production technology
  • Interviews with experienced capsule manufacturers