Process Adaptation Diversification: The Development Trend Of Gel Dissolving Tanks Driven By New Capsule Raw Materials

Jan 18, 2026

Leave a message

In recent years, with the continuous upgrading of the pharmaceutical and health product industries, the demand for capsule products with higher safety, environmental protection and functional characteristics has been rising. This trend has directly promoted the widespread application of plant-based and composite-based capsule raw materials, which have gradually become important alternatives to traditional animal-derived raw materials such as gelatin. Typical representatives of these new raw materials include gelatin-HPMC composites, sodium alginate-starch composites, and various pure plant-based polysaccharide materials. Against this backdrop, the gel dissolving tank, as a core equipment in the capsule production process, is facing an inevitable transformation towards customization characterized by multi-material compatibility, stage-wise temperature control, and variable shear rate. This transformation is not only a response to the material properties of new raw materials but also a key guarantee for improving product quality, stabilizing production processes, and meeting diversified market demands.

 

Firstly, the popularization of diverse raw materials has put forward an urgent demand for multi-material compatibility of gel dissolving tanks. Compared with single traditional gelatin, plant-based and composite-based raw materials have significant differences in physical and chemical properties. For example, HPMC (hydroxypropyl methylcellulose) in composite materials has poor water solubility at low temperatures and is prone to agglomeration, while sodium alginate is sensitive to calcium ions and requires a relatively mild dissolution environment. Gelatin, as a component in composite systems, needs to maintain its gelation properties while coordinating with other materials. Traditional gel dissolving tanks are usually designed for specific raw materials, with fixed structural parameters and feeding methods, which are difficult to adapt to the dissolution requirements of multiple raw materials. To solve this problem, the customized gel dissolving tank will optimize the feeding system and tank body structure. The feeding port may be equipped with a multi-channel adjustable device, which can realize the separate feeding or mixed feeding of different raw materials according to the formula ratio, and match the corresponding pre-wetting mechanism to prevent agglomeration of water-insoluble raw materials. At the same time, the inner wall of the tank body will adopt a smooth anti-adhesion coating and a reasonable stirring structure to ensure that various raw materials can be uniformly dispersed and mixed during the dissolution process, avoiding local concentration differences or incomplete dissolution caused by material characteristics.

 

Secondly, stage-wise temperature control has become a core technical requirement for gel dissolving tanks adapting to new raw materials. The dissolution process of plant-based and composite-based raw materials often has obvious stage characteristics, and different temperature ranges are required in different stages of pre-wetting, swelling, and complete dissolution. Taking the gelatin-HPMC composite system as an example, if the temperature is too high at the initial stage of feeding, HPMC is likely to form a surface gel film, which hinders the further penetration of water and leads to incomplete internal dissolution; while gelatin needs an appropriate high temperature to ensure complete melting and stable viscosity. For sodium alginate-starch composite materials, low-temperature swelling first and then moderate temperature dissolution can effectively avoid starch gelatinization and excessive viscosity increase, which is conducive to subsequent homogenization and molding. Therefore, the customized gel dissolving tank will be equipped with a high-precision multi-stage temperature control system. This system can set different temperature control sections according to the dissolution characteristics of different raw material formulas, and realize real-time monitoring and precise adjustment of the temperature in the tank through temperature sensors distributed in different positions. For example, in the pre-wetting stage, the temperature is controlled at 30-40°C to promote the uniform dispersion of raw materials; in the swelling stage, the temperature is slowly raised to 50-60°C to accelerate the water absorption and swelling of materials; in the complete dissolution stage, the temperature is adjusted to 60-80°C (adjusted according to the proportion of composite materials) to ensure that all components are fully dissolved. This stage-wise temperature control mode not only improves the dissolution efficiency but also effectively protects the structural stability of raw materials, avoiding the degradation of active components or changes in material properties caused by inappropriate temperature conditions.

 

Finally, the variable shear rate design is an important part of the customization of gel dissolving tanks. The viscosity of plant-based and composite-based raw materials varies greatly during the dissolution process, and different shear rates are required in different stages to achieve the best dissolution effect. In the initial stage of raw material dispersion, a higher shear rate is needed to break up agglomerated particles and accelerate the mixing of materials and water; in the swelling and dissolution stages, an appropriate medium shear rate should be maintained to promote the uniform diffusion of water and the dissolution of materials without damaging the molecular structure of the materials; in the later stage of dissolution, a lower shear rate can be used to stabilize the viscosity of the gel solution and avoid excessive shear leading to a decrease in the gel strength of the solution. For composite materials with different component ratios, the optimal shear rate range also varies. For example, the shear rate required for a composite system with a high proportion of gelatin is different from that with a high proportion of HPMC. The customized gel dissolving tank will adopt a frequency conversion adjustable stirring system, which can flexibly adjust the shear rate according to the type of raw materials, the proportion of composite components, and the stage of the dissolution process. The stirring paddle will also be customized and optimized, and different paddle types (such as anchor type, paddle type, or turbine type) can be selected according to the material characteristics to match the shear rate requirements, ensuring that the gel solution after dissolution has uniform viscosity, no particles, and good stability, which lays a solid foundation for the subsequent capsule molding process.